ATRACTO SILVER

FEATURES

• ATRACTO provides a glittering decorative look by its metallic pigments content
• Rich and bright pigments give a pleasant brightness to the surface.

• Due its high vapor permeability, it allows surface to discharge the steam and breathe

• As it is water-based, it is harmless to human health and environment
• It provides a pleasant odour in the application environments with its perfumed feature.

 SURFACE PREPARATION

After removing all kinds of dirt, grease, bloated paint and dust from the application surface, the surface defects should be corrected with SAN DECO Acrylic Putty Interior and undercoated with    SAN DECO Decoprimer.

 APPLICATION INSTRUCTIONS

• ATRACTO should be mixed homogenously, without dilution.
• At first coating, ATRACTO should be applied by steel trowel or brush.

The second coat can be completed by using a towel again with giving desired effect

• Minimum 6 hours should be allowed between each coat

• The environment of application must be kept between +5 °C to +35 °C within 24 hours during and after the application.

DRYING TIME

Allow 5-6 hours for touch dry and 24 hours for complete dry at 23 ^oC environment conditions.

PACKAGING

2.5LTRS

THEORETICAL CONSUMPTION

Depending on the surface smoothness, its porosity and the application methods, for a single coat application:

-1 lt covers  8,0 – 12,5 m² of surface

-1 kg covers 6,5 – 10,0 m² of surface

-The paint consumption for 1 m² area is 80 -125 ml and 100 – 150 gr.

STORAGE

It should be stored 1 year in a sealed package, cool and dry place and protected from direct sunlight; at a temperature between +5 ^oC and +35 ^oC.

PRECAUTIONARY STATEMENTS

• P 102 Keep out of reach of children
• P 301+ P 310 IF SWALLOWED: Immediately call a POISON CENTRE or doctor/physician
• Don’t use the containers for food preservation.

Note: For more technical information, please check the Material Safety Data Sheet (MSDS) of the product.