DECOPRIMER

FEATURES

• Creates a rough look on the surface.
• Adheres very well to the surface and lays the ground for other decorative materials to be applied.
• It has a high covering capacity.
• Water-based, odor-free; it is harmless for human health and environment.

SURFACE PREPARATION

Clean all dirt, oil, blistered paint and dust off the application surface; level the surface defects with SAN DECO Acrylic Putty Interior.

APPLICATION INSTRUCTIONS

• Prior to application, Dilute DECO PRIMER with 25-30% of fresh water and mix it mechanically until homogeneization; and then apply it in one coat with a roller.

• The environment of application must be kept between +5 °C to +35 °C within 24 hours during and after the application.

DRYING TIME

Allow 2-3 hours for touch dry and 24 hours for complete dry at 23 ^oC environment conditions.

PACKAGING

2,5 L

THEORETICAL CONSUMPTION

According to the smoothness of the surface, its porosity and application methods, for a single layer application:

-1 lt covers  10,5 – 15,0 m² of surface

-1 kg covers 6,5 – 10,0 m² of surface

-The paint consumption for 1 m² area is 65 -100 ml and 100 – 150 gr.

STORAGE

It should be stored 1 year in a sealed package, in a cool and dry place and protected from direct sunlight; at a temperature between +5 °C and +35 °C.

PRECAUTIONARY STATEMENTS

• P 102 Keep out of reach of children
• P 301+ P 310 IF SWALLOWED: Immediately call a POISON CENTRE or doctor/physician
• Do not use the containers for food protection.

Note: For more technical information, please check the Material Safety Data Sheet (MSDS) of the product